Ghost Gunner 2

$2,000.00

Sold with the cut codes to complete selected 80% lowers and frames such as the AR-15, AR-308, and the M1911, the Ghost Gunner 2 takes it name from its second-generation, custom motion-control board, which allows it to operate as a standard CNC machine. GG2 accepts g-code from most CAM post-processors. To use the GG2, you only need to provide the desired frame/lower and corresponding jig set (sold separately) and any computer or laptop with a windows or mac OS. For more information, check out the product details and lower guide below.

Order one of our Starter Kits including everything you need to get milling. For best results, use 80% lowers/frames, fixtures, and tooling designed to work harmoniously with the Ghost Gunner.

As seen on RECOILtv
Review by RECOIL
Review by Loadout Room

Product Details

Ghost Gunner is a general purpose CNC mill built upon the Ardunio micro-controller.

GG2 takes it name from its second-generation, custom motion-control board, which allows it to operate as a standard CNC machine. GG2 accepts g-code from most CAM post-processors.

GG2 unibody spindles are of stainless steel construction with the ER-11 collet system integrated in the shaft. They have increased radial rigidity, precision bearing diameters, and a 10x reduced initial runout specification.

Included with the GG2: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included.

Shipping for the GG2 will be $100 flat rate for anywhere in the United States.

Lower Guide

Ghost Gunner 2 uses the following DD lower files:

It is also compatible with the following g-code suites:

We cannot currently recommend anodized lowers or frames, but for additional information on anodized lowers or frames please email us at support@ghostgunner.net.

Tech Specs

System Requirements
Windows XP+ or Mac OS X+
Parameter Value Unit Note
X/Y/Z travel 75/180/60.5 mm
X/Y/Z table size 125/270/95 mm Larger X and Z possible
Spindle Power 115 W Irms limited
Spindle speed 3000-10000 rpm Variable
Weight 23 Kg ~51 pounds
T-Slot Spacing 40 mm Center-to-center
Table T-slots 2 QTY Compatible with 20 mm T-nuts
Collet system ER11 Accepts tools up to 8 mm
Operating temp. 0-40 °C To prevent overheating
5 V current (max) 95 mA Can plug into unpowered hubs
24 V current 160 W

** See more detailed specifications here.

Additional information

Weight 832 oz
Dimensions 23 × 19 × 16 in




Product Details

Ghost Gunner is a general purpose CNC mill built upon the Ardunio micro-controller.

GG2 takes it name from its second-generation, custom motion-control board, which allows it to operate as a standard CNC machine. GG2 accepts g-code from most CAM post-processors.

GG2 unibody spindles are of stainless steel construction with the ER-11 collet system integrated in the shaft. They have increased radial rigidity, precision bearing diameters, and a 10x reduced initial runout specification.

Included with the GG2: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included.

Shipping for the GG2 will be $100 flat rate for anywhere in the United States.

Lower Guide

Ghost Gunner 2 uses the following DD lower files:

It is also compatible with the following g-code suites:

We cannot currently recommend anodized lowers or frames, but for additional information on anodized lowers or frames please email us at support@ghostgunner.net.

Tech Specs

System Requirements
Windows XP+ or Mac OS X+
Parameter Value Unit Note
X/Y/Z travel 75/180/60.5 mm
X/Y/Z table size 125/270/95 mm Larger X and Z possible
Spindle Power 115 W Irms limited
Spindle speed 3000-10000 rpm Variable
Weight 23 Kg ~51 pounds
T-Slot Spacing 40 mm Center-to-center
Table T-slots 2 QTY Compatible with 20 mm T-nuts
Collet system ER11 Accepts tools up to 8 mm
Operating temp. 0-40 °C To prevent overheating
5 V current (max) 95 mA Can plug into unpowered hubs
24 V current 160 W

** See more detailed specifications here.

Additional information

Weight 832 oz
Dimensions 23 × 19 × 16 in