« prev
|next »
Made at Ghost Gunner HQ
Austin, Texas U.S.A.
Ghost Gunner 2
Your order will contain the fully-assembled GG2 CNC, tooling, software, and operating instructions.
We charge a $100.00 flat fee for shipping the GG2 domestically. Shipments to Canada and Mexico are an additional $100 and will be made without the inclusion of any .DD cutting files.
Please allow 8-10 weeks for delivery.
Ghost Gunner is a general purpose CNC mill built upon the Ardunio micro-controller.
GG2 takes it name from its second-generation, custom motion-control board, which allows it to operate as a standard CNC machine. GG2 accepts g-code from most CAM post-processors.
GG2 unibody spindles are of stainless steel construction with the ER-11 collet system integrated in the shaft. They have increased radial rigidity, precision bearing diameters, and a 10x reduced initial runout specification.
Ghost Gunner 2 uses the following DD lower files:
- AR-15 milspec 80 percent lower
- AR-308 (DPMS Gen 1) 80 percent lower
- M1911 frame
It is also compatible with the following g-code suites:
| System Requirements |
|---|
| Windows XP+ or Mac OS X+ |
| Parameter | Value | Unit | Note |
|---|---|---|---|
| X/Y/Z travel | 75/180/60.5 | mm | - |
| X/Y/Z table size | 125/270/95 | mm | Larger X and Z possible |
| Spindle Power | 115 | W | Irms limited |
| Spindle speed | 3000-10000 | rpm | Variable |
| Weight | 23 | Kg | ~51 pounds |
| T-Slot Spacing | 40 | mm | Center-to-center |
| Table T-slots | 2 | QTY | Compatible with 20 mm T-nuts |
| Collet system | ER11 | - | Accepts tools up to 8 mm |
| Operating temp. | 0-40 | °C | To prevent overheating |
| 5 V current (max) | 95 | mA | Can plug into unpowered hubs |
| 24 V current | 160 | W | - |
** See more detailed specifications here.
