Ghost Gunner 3-S Final Balance

$2,000.00

Current lead time for Ghost Gunner 3-S is Q4 2024.

Notice: Ghost Gunner CNC machines are not currently available to non-FFL California customers. We recommend alternative CNC suppliers. California FFLs may contact us at [email protected] for ordering information.

GG3-S ships with code to complete the following:

Purchase a starter kit or tooling (not included with GG3-S purchase) for the project of your choice!

Layaway Options Available

Note: your jurisdiction may require you to be a licensed FFL or licensed gunsmith to purchase this product.

Product Details

Ghost Gunner 3 is a general purpose CNC mill that gives you the ability to finish 80% receivers and frames with ease, in the comfort of your own home.

Ghost Gunner 3 is a complete redesign based on the successes of the GG2. It uses a milled, precision unibody frame for sharply improved squareness and rigidity. Optical limit switches and pre-loaded, self-aligning ballscrews allow it to deliver advanced positional accuracy.

GG3 incorporates a custom motion-control board with a closed loop, digital VFD controller. The machine accepts g-code from most CAM post-processors, and supports tool diameters up to 8 mm (~5/16”).

Included with the GG3: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included. Shipping is a flat rate of $150 in the United States.

Lower Guide

To begin your project, order one of our Starter Kits, which includes everything you need to get milling. For best results, use 80% lowers/frames, fixtures, and tooling designed to work specifically with the Ghost Gunner platform.

Ghost Gunner 3 uses the following DD lower files:

It is also compatible with the following g-code suites:

We cannot currently recommend anodized lowers or frames, but for additional information on anodized lowers or frames please email us at [email protected].

Tech Specs

System Requirements
Windows 7+, Mac OSX 10.13+

 

Parameter Value Unit Note
Weight 19 Kg ~42 pounds
X/Y/Z travel 89/242/79 mm Double the GG2 build volume
X/Y/Z interior clearance 116/299/162 mm Measurements with cover on
Peak Spindle Power 375 W Overload protection prevents exceeding
Continuous Spindle Power 190 W Long-term average, temperature limited. Can be exceeded.
Spindle speed 1500-8000 rpm Variable, closed loop. Can apply full power at any rpm.
Max Linear Velocity 2600 mm/min 260% faster than GG2
Max Linear Acceleration 250 mm/s^2 8 times more than GG2
Spindle runout 0.0009 in Measured on tapered collet, 1mm from tip
T-Slot Spacing 40 mm Center-to-center
Table T-slots 2 QTY Compatible with 20 mm T-nuts
Collet system ER11 – Accepts tools up to 8 mm

See more detailed specifications here.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Additional information

Weight 832 oz
Dimensions 23 × 19 × 16 in

Product Details

Ghost Gunner 3 is a general purpose CNC mill that gives you the ability to finish 80% receivers and frames with ease, in the comfort of your own home.

Ghost Gunner 3 is a complete redesign based on the successes of the GG2. It uses a milled, precision unibody frame for sharply improved squareness and rigidity. Optical limit switches and pre-loaded, self-aligning ballscrews allow it to deliver advanced positional accuracy.

GG3 incorporates a custom motion-control board with a closed loop, digital VFD controller. The machine accepts g-code from most CAM post-processors, and supports tool diameters up to 8 mm (~5/16”).

Included with the GG3: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included. Shipping is a flat rate of $150 in the United States.

Lower Guide

To begin your project, order one of our Starter Kits, which includes everything you need to get milling. For best results, use 80% lowers/frames, fixtures, and tooling designed to work specifically with the Ghost Gunner platform.

Ghost Gunner 3 uses the following DD lower files:

It is also compatible with the following g-code suites:

We cannot currently recommend anodized lowers or frames, but for additional information on anodized lowers or frames please email us at [email protected].

Tech Specs

System Requirements
Windows 7+, Mac OSX 10.13+

 

Parameter Value Unit Note
Weight 19 Kg ~42 pounds
X/Y/Z travel 89/242/79 mm Double the GG2 build volume
X/Y/Z interior clearance 116/299/162 mm Measurements with cover on
Peak Spindle Power 375 W Overload protection prevents exceeding
Continuous Spindle Power 190 W Long-term average, temperature limited. Can be exceeded.
Spindle speed 1500-8000 rpm Variable, closed loop. Can apply full power at any rpm.
Max Linear Velocity 2600 mm/min 260% faster than GG2
Max Linear Acceleration 250 mm/s^2 8 times more than GG2
Spindle runout 0.0009 in Measured on tapered collet, 1mm from tip
T-Slot Spacing 40 mm Center-to-center
Table T-slots 2 QTY Compatible with 20 mm T-nuts
Collet system ER11 – Accepts tools up to 8 mm

See more detailed specifications here.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Additional information

Weight 832 oz
Dimensions 23 × 19 × 16 in

Related products