Ghost Gunner 2 – Deposit

$500.00

Sold with the cut codes to complete 80% lowers and frames such as the AR-15, AR-308, the M1911, and Polymer 80 frames, the Ghost Gunner 2 takes it name from its second-generation, custom motion-control board, which allows it to operate as a standard CNC machine.

GG2 accepts g-code from most CAM post-processors. To use the GG2, you need only provide the desired frame/lower and corresponding jig set (sold separately) and any computer or laptop with Windows or Mac OS. For more information, check out our product details and lower guide below.

By placing this deposit, you are ordered on our wait list for our next production run of machines, which we anticipate will ship in January 2020. The price of the unit is $2,000.00 (before shipping), and your deposit goes toward the total price.

Order one of our Starter Kits, which includes everything you need to get milling. For best results, use 80% lowers/frames, fixtures, and tooling designed to work specifically with the Ghost Gunner platform.

As seen on RECOILtv
Review by RECOIL
Review by Loadout Room

Product Details

Ghost Gunner is a general purpose CNC mill built upon the Ardunio micro-controller.

GG2 takes it name from its second-generation, custom motion-control board, which allows it to operate as a standard CNC machine. GG2 accepts g-code from most CAM post-processors.

GG2 unibody spindles are of stainless steel construction with the ER-11 collet system integrated in the shaft. They have increased radial rigidity, precision bearing diameters, and a 10x reduced initial runout specification.

Included with the GG2: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included.

Shipping for the GG2 will be $100 flat rate for anywhere in the United States.

Lower Guide

Ghost Gunner 2 uses the following DD lower files:

It is also compatible with the following g-code suites:

We cannot currently recommend anodized lowers or frames, but for additional information on anodized lowers or frames please email us at [email protected].

Tech Specs

System Requirements
Windows XP+ or Mac OS X+
Parameter Value Unit Note
X/Y/Z travel 75/180/60.5 mm
X/Y/Z table size 125/270/95 mm Larger X and Z possible
Spindle Power 115 W Irms limited
Spindle speed 3000-10000 rpm Variable
Weight 23 Kg ~51 pounds
T-Slot Spacing 40 mm Center-to-center
Table T-slots 2 QTY Compatible with 20 mm T-nuts
Collet system ER11 Accepts tools up to 8 mm
Operating temp. 0-40 °C To prevent overheating
5 V current (max) 95 mA Can plug into unpowered hubs
24 V current 160 W

** See more detailed specifications here.





Product Details

Ghost Gunner is a general purpose CNC mill built upon the Ardunio micro-controller.

GG2 takes it name from its second-generation, custom motion-control board, which allows it to operate as a standard CNC machine. GG2 accepts g-code from most CAM post-processors.

GG2 unibody spindles are of stainless steel construction with the ER-11 collet system integrated in the shaft. They have increased radial rigidity, precision bearing diameters, and a 10x reduced initial runout specification.

Included with the GG2: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included.

Shipping for the GG2 will be $100 flat rate for anywhere in the United States.

Lower Guide

Ghost Gunner 2 uses the following DD lower files:

It is also compatible with the following g-code suites:

We cannot currently recommend anodized lowers or frames, but for additional information on anodized lowers or frames please email us at [email protected].

Tech Specs

System Requirements
Windows XP+ or Mac OS X+
Parameter Value Unit Note
X/Y/Z travel 75/180/60.5 mm
X/Y/Z table size 125/270/95 mm Larger X and Z possible
Spindle Power 115 W Irms limited
Spindle speed 3000-10000 rpm Variable
Weight 23 Kg ~51 pounds
T-Slot Spacing 40 mm Center-to-center
Table T-slots 2 QTY Compatible with 20 mm T-nuts
Collet system ER11 Accepts tools up to 8 mm
Operating temp. 0-40 °C To prevent overheating
5 V current (max) 95 mA Can plug into unpowered hubs
24 V current 160 W

** See more detailed specifications here.