Ghost Gunner 3 Deposit
Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. GG3 removes material 5 times faster than GG2 and the new unibody construction provides greater rigidity, drastically improving finished part quality.
The custom spindle is powered by a specially designed closed-loop digital VFD, which sets a new standard in desktop CNC machining. GG3 ships with code to complete 80% AR-15, AR-308, M1911, and Polymer 80 frames frames. All existing jigs are compatible with GG3.
to see a full list of the new features
Reserve your unit today
Ghost Gunner 3 is a general purpose CNC mill that gives you the ability to finish 80% receivers and frames with ease, in the comfort of your own home.
By placing this deposit, you reserve your place on the GG3 waitlist. You will be asked to complete your order in Q1 of 2020 at which point your unit will be shipped. The full price of the machine is $2,100.00 and your deposit goes toward that total price. To find out about financing your unit,
Ghost Gunner 3 is a complete redesign based on the successes of the GG2. It uses a milled, precision unibody frame for sharply improved squareness and rigidity. Optical limit switches and pre-loaded, self-aligning ballscrews allow it to deliver advanced positional accuracy.
GG3 incorporates a custom motion-control board with a closed loop, digital VFD controller. The machine accepts g-code from most CAM post-processors, and supports tool diameters up to 8 mm (~5/16”).
Included with the GG3: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included. Shipping is a flat rate of $100 in the United States.
To begin your project, order one of our Starter Kits, which includes everything you need to get milling. For best results, use 80% lowers/frames, fixtures, and tooling designed to work specifically with the Ghost Gunner platform.
Ghost Gunner 2 uses the following DD lower files:
It is also compatible with the following g-code suites:
We cannot currently recommend anodized lowers or frames, but for additional information on anodized lowers or frames please email us at [email protected].
|Windows 7+, Mac OSX 10.13+
||Double the GG2 build volume
|X/Y/Z interior clearance
||Measurements with cover on
|Peak Spindle Power
||Overload protection prevents exceeding
|Continuous Spindle Power
||Long-term average, temperature limited. Can be exceeded.
||Variable, closed loop. Can apply full power at any rpm.
|Max Linear Velocity
||260% faster than GG2
|Max Linear Acceleration
||8 times more than GG2
||Measured on tapered collet, 1mm from tip
||Compatible with 20 mm T-nuts
||Accepts tools up to 8 mm
See more detailed specifications here.